 New Releases; last updated: Thursday, August 26, 2010 The following list shows the history of changes and extensions: W61PC V6.8.11 W-CODE V6.8.11 XMLSDK V6.8.12 | Mar-2010 | W-CODE V6.8.1 | | | New modes - DMR: New digital, TDMA based mobile radio mode
- Media Player/Recorder: This tool records signals directly to WAV-files from the host sound card inputs. During playback of WAV files the signal is sent unprocessed to the W-CODE and a monitoring signal is played through the sound card
- PSK-63, -125: Now independent amateur radio modes implementing the FLARQ emergency messaging protocol
- PSK-250: New amateur radio modes implementing the FLARQ protocol
- VDL-M2: New digital, aeronautical data link mode
- W-PACTOR- III: Initial release of WAVECOM’s implementation of PACTOR-III
Improvements and modifications - Installation: The procedure has been greatly improved and simplified, an option to delete all settings before re- or new installation added
- CHU: Polarity now manually selected
- CW: New, much improved demodulator will decode speeds up to 90 wpm
- AIS: New “Inland AIS” interpretations of standard AIS message fields added. Standard AIS, Inland AIS, St. Lawrence Seaway and PAWSS AIS binary message decoding added
- Baudot: Reworked decoder with improved polarity detection and enhanced performance
- PACTOR-I, PACTOR-II: ASCII 0x1E (idle) removed from hex output
- W-CODAN-9001: Output of demodulated multichannel symbols, de-randomization of secure and unsecure modes, user selectable key for de-randomization of secure modes, output of recognized key in secure mode, output of status information, output of recognized frame type, decoding of chat messages into readable output, decoding of text files into readable output, decoding of data into hex output, (CODAN data compression in preparation)
- W-CLOVER-2, -2000: “CRC recognition” changed to “Display Mode” for selection of error-free frames or all frames. Option for user defined table of CRC added
- MIL-141A, CODAN-9001: Improved performance for Golay (24, 12) decoder
- MIL-39T: Display formats “ASCII” and “ITA-5” merged
- CIS-36-50, CIS-50-50: More fault-tolerant start and stop criteria, automatic default to Letter Shift after idle or a longer sequence of invalid data, synchronization to valid 3:4 characters without need for preamble
- DTMF: Character set changed (“*” and “#” replaces “E” and “F”)
- COQUELET-8, -13, -80: Bar graph range corrected
- STANAG, MIL modes: ITA-2 "U" character now printed
- Classifier-CodeCheck: Refresh of FFT display implemented when starting a new classification.
- State display of Robust-Packet changed (Data Rate, Modulation, Packet Length).
- Standard shift of CIS-36 changed to 1320 Hz.
- TCP/IP streaming format "PXGF" added
- Single cursors for PSK modes
- New dat file for HF-ACARS
| | Nov-2009 | W61PC V6.8.0 | | | New modes : - W-PACTOR-III
- VDL-M2 (ARINC VHF Digital Link Mode 2, ICAO Annex-10 Vol III)
New functions - W-CLOVER-2 “CRC Recognition” added
- W-CLOVER-2000 “CRC Recognition” added
- Binary Output of PACTOR-I and PACTOR-II enhanced
- MIL-39T enhanced
- CIS-36-50, CIS-50-50 enhanced
- AIS enhanced
Changes - Tested with XP, VISTA, W7 and Server 2008 (W2000 is no longer supported)
- W-CODAN-9001, LSR initialization
- XML: customer inputs configuration improved
- CW improved
Fixes - Easier installation and de-installation
| | Aug-2009 | | | | New modes : - ALE-400
- ROBUST-PACKET
- ORBCOMM
- SAT-B-C-TFC
- Half duplex FAX and modem modes (automatic recognition)
- FAX-G3 T4/T6/JPEG/JBIG T.30 protocol with ECMM
- FAX-G3-V.17
- FAX-G3-V.27ter
- FAX-G3-V.29
- FAX-G3-V34hdx
- V.21, BELL103
- V.22 / V.22bis, BELL212A
- V.23
- Alternative modes (developed by WAVECOM)
- W-CODAN-9001:
- Text Output
- No regional license restrictions
- W-CLOVER-2
- W-CLOVER-2000
New functions - FFT and Sonagram tuning display
- CLOVER-2 and CLOVER-2000: Enable or disable CRC
- PACTOR-III : Indication whether burst or return channel is processed
- PSK-31: Now supports full 8 bit characters
- Custom alphabets supported
- Binary output supported
- Code Check Classifier: MIL-39Tone is supported
- Cursor handling improved
- PACTOR-II: AFC ± 50 Hz, additional frame type detection, HEX (Binary output)
- Pass Band display shows additional tuning information (shift, mark, space frequency) in a tooltip box
- Clear INI-file: function added
Changes - Name of ROBUST-PACKET-RADIO changed to ROBUST-PACKET
- OLIVIA changed
- WAVECOM Data File Format, additional information added
- “Message Type” dialog box. New parameter for Parity (MARK and SPACE)
- “Message Type” dialog box. Display format “ ITA5” and “ASCII” merged to “ITA5 (ASCII)”
- Number of “Custom Alphabets” and “Custom Inputs” limited to 16.
- FFT and Sonagram tuning parameter moved from options to the new context menu.
- “Pause Graphic” option for the sonagram tuning view
- OSI-Level removed
- MIL-STD tuning changed
Fixes - SAT data corrected.
- Codan-9001 : polarity corrected.
- Setup corrected.
| | Jul-2009 | W-CODE V6.7.0 | | | New modes : - ALE-400
- ROBUST-PACKET
- ORBCOMM
- SAT-B-C-TFC
- Half duplex FAX and modem modes (automatic recognition)
- FAX-G3 T4/T6/JPEG/JBIG T.30 protocol with ECMM
- FAX-G3-V.17
- FAX-G3-V.27ter
- FAX-G3-V.29
- FAX-G3-V34hdx
- V.21, BELL103
- V.22 / V.22bis, BELL212A
- V.23
- Full duplex modem modes (automatic recognition):
- V.26 / V.26bis
- V.32 / V.32bis
- V.34
- V.90V.92
- Alternative modes (developed by WAVECOM)
- W-CODAN-9001:
- Text Output
- No regional license restrictions
- W-CLOVER-2
- W-CLOVER-2000
New functions - FFT and Sonagram tuning display
- CLOVER-2 and CLOVER-2000: Enable or disable CRC
- PACTOR-III : Indication whether burst or return channel is processed
- PSK-31: Now supports full 8 bit characters
- Custom alphabets supported
- Binary output supported
- Code Check Classifier: MIL-39Tone is supported
- Cursor handling improved
- PACTOR-II: AFC ± 50 Hz, additional frame type detection, HEX (Binary output)
- Pass Band display shows additional tuning information (shift, mark, space frequency) in a tooltip box
- Clear INI-file: function added
Changes - Name of ROBUST-PACKET-RADIO changed to ROBUST-PACKET
- OLIVIA changed
- WAVECOM Data File Format, additional information added
- “Message Type” dialog box. New parameter for Parity (MARK and SPACE)
- “Message Type” dialog box. Display format “ ITA5” and “ASCII” merged to “ITA5 (ASCII)”
- Number of “Custom Alphabets” and “Custom Inputs” limited to 16.
- FFT and Sonagram tuning parameter moved from options to the new context menu.
- “Pause Graphic” option for the sonagram tuning view
- OSI-Level removed
- MIL-STD tuning changed
Fixes - SAT data corrected.
- Codan-9001 : polarity corrected.
- Setup corrected.
| | Mar-2009 | W-61PC V6.6.51 | | | - License system updated.
- New modes : ROBUST-PACKET, ORBCOMM, SAT-B-C-TFC
- Clover-2/2000 : CRC on/off can be selected.
- PACTOR-III : display if burst or the return channel is processed.
- Codan-9001 : polarity corrected.
- Clear Ini-File implemented.
- PSK-31, full 8bit support.
- OLIVIA decodes signals from Multipsk.
- Custom 5-bit alphabets supported.
- Binary output supported.
- SAT data corrected.
- MIL-39Tone is supported by the codecheck classifier.
- PACTOR-II improved.
| | Oct-2008 | W-CODE V6.6.51 | | | - Sample rate fine-tuning: 1 ppm
- WAV file custom input: "no repeat" bug fixed
- XML-RCI: Metadata Bug fixed.
- PSK-31-FEC improved
- License system updated.
| | SEP-2008 | W-BV V2.2.10 | | | - Works with W51PC, W61PC and W-CODE
- Unzip function added
- Auto Calculation function added
- Enable function:
- Improvement in the history explorer
| | Aug-2008 | W-CODE V6.6.50 | | | - BIIS
- OLIVIA
- SAT-B-HSD
- Usage of Phase plane changed. Sync/Async does not exist anymore, instead "Async" and "IQ" are used.
- New Satellite menu
- History function improved.
- Relative frequency display of the spectrum can be selected by changing it in the preferences dialog.
- Handling of MIL188110-39Tone improved.
- Station list for FMS-BOS implemented.
- SAT-C improved.
- Custom input TCP/IP implemented.
| | Apr-2008 | W61PC V6.6 | | | - Vista support
- Virtual Audio Cables added
- Sonagram with time cursors
- ZVEI-3
- DZVEI
- PZVEI
- PDZVEI
- PCCIR
- CCIR-2
- MODAT
- MOBITEX-8000
- NWR-SAME
- SAT-AERO (Aero-I)
- CHU
- STANAG-5065-FSK
- Classifier (OFDM).
- PACTOR-II improved (16PSK)
- SAT improved (Service, Delete)
- MIL-39Tone improved
- DGPS improved.
- MOBITEX-1200 improved.
- Analysis-GUI optimized.
- ATIS improved.
- Classifier settings can be controlled from remote interface (XML).
| | Mar-2008 | W61BV V2.1.00 | | | - Hexadecimal view added
- Enhanced printer dialog
- Matlab Custom Libraries
| | Mar-2008 | EasySAT System V1.1.00 | | | - Configuration data moved to public document folder.ZVEI-3
| | Jan-2008 | W51 V6.6 | | | - ZVEI-3
- DZVEI
- PZVEI
- PDZVEI
- PCCIR
- CCIR-2
- MODAT
- MOBITEX-8000
- NWR-SAME
- CHU
- STANAG-5065-FSK
- Classifier (OFDM).
- PACTOR-II improved (16PSK)
- SAT improved (Service, Delete)
- MIL-39Tone improved
- DGPS improved.
- MOBITEX-1200 improved.
- Analysis-GUI optimized.
- ATIS improved.
- Classifier settings can be controlled from remote interface (XML).
|
©Wavecom AG |
