For Windows 95/98/Me/NT4/2000/ and XP Both RX/TX (encoding/decoding) New ! RadioCom 5 Update New !
How this program works? This program will enable you to decode digital and analog signals out of any high quality Transceiver / Receiver. It will also improve sound readability quality, This ability was only possible before hand using a High Cost DSP-Receiver and or complex active and costly filters. All of this is possible using the existing DSP capabilities of your Computer and (DSP) Sound, and all of this Without any complicated hardware interfaces, the signal from the Receiver goes directly into the computer for processing. With a COM-Port and Soundcard combination Transceiver / Receiver can be accomplished as well. The DSP processed and filtered signal will normally output from your computer-loudspeaker system. RadioCom 4.0 will be delivered in the basic version with BONITO -DSP-filter-analyzer, RTTY, CW, FAX, SSTV and DCF77-decoder. As can be seen by the explosion of COSTLY hardware based solutions (TNC's and Converters) there exists a considerable demands to receive "digital" radio messages. This demand can now be fulfilled using a standard "qualified" computers, this new solution exists which and it doesn't need expensive DSP technology anymore and it smoother better handling and user friendly interface eliminates. Expensive screens, tools etc. Such a technology is realized with the RadioCom 4.0 package. This program is able to decode and record audio messages, fax, Morse code (CW), and rtty-messages. With the RadioCom 4.0 frequency-manager it's possible to catch and store interesting messages and to recall them again for future reference. The high quality programs from BONITO are known worldwide. So we didn't provide any further descriptions. You are welcome to call us for further information. Bonito DSP-Analyzing System It's hard work to understand and program for digital-sound-processing, frequency-analyzing and digital decoding. All of this functionality can now be done with a computer, without special costly and intricate hardware based filter-technology. Signals from simple receivers and Transceivers can be improved and processed using RadioCom 4.0 's optimal filter in such a way that you can hear and see "acoustical effect" from it. With this program you can evaluate signals, which are normally unhearable. Every filter type and quality perimeter can be realized for the respective operating modes. You can notice, how a very small low level signal is become louder and very clear. With minimal spill over from other stations. You can select and specify individual band filters and notch filters with different "undulations" and band-widths. Extremely small and complexly selective-filter-cascades to decode multi-channel-signals are used in the decoder-system. A frequency analyzer window shows the frequency band and the effect from the filter. Tuning helpers like adjustment cross are possible without an oscilloscope. You are now able with the aide of RadioCom 4.0 and its simple tools to perform things on your computer with in the past could be only done before with expensive hardware. Technical Dates
You can control the follow Receiver/Transceiver: The program used a Bonito-switch box (a control-interface) (included with the program), which replaces the following external level-converters:
Receiver/Transceiver-Computer-Controlling for: ALL YOU NEED IS: A receiver or transceiver You could use any world receiver like Sony, Panasonic, Grundig, Siemens or others with SSB. If you use one of these, you will not have the advantage of remote-control. We recommend controllable receiver by YAESU, ICOM, LOWE, KENWOOD, NRD, AOR etc. The program-package: How to connect your radio to the Bonito-switchbox? You will find the most recent information at |
