The W61PC decoder offers all functions required to analyze, decode, and process radio data communications in the HF, VHF, UHF and SHF range

• local – use in your own PC with the standard W51PC application software
• remote – use over the LAN, with the standard W51PC application software
• remote control – control from other applications using customer written or third party software (example Alarm Monitor)

 This allows the system to be adapted to the clients’ needs and applications.

Using an audio or IF signal, the W61PC decodes a variety of text and graphical transmission modes. The detection of signal parameters is assisted by a large number of analysis and measurement functions that operate over a wide range. The W61PC is the next advanced version of the famous line of WAVECOM decoders. It gives more flexibility, calculating power to do the required.

• To analyze, demodulate and detect signals a new wideband FFT with a bandwidth of 96 kHz was added.
• IF-inputs, the best connection to your receiver.
• Fully tunable 70 MHz IF input for satellite monitoring with no external receivers.
• High performance wideband analog front end.
•  High-speed DSP.
• Fully reconfigurable (inputs, FPGA, DSP, bandwidth, IF frequency ).
• Half-size PCI card with SMA input connectors.
•  Highly reconfigurable front end:
  • Three wideband AF/IF inputs (50 Hz – 25 MHz).
  • One wideband IF input (52.5 MHz – 87.5 MHz) with SAW filter.
  • 14 bit/92.16 MSps analog to digital converter (ADC).
  •  Automatic level control and overrun protection.
  •  60 dB input dynamic range
• Digital Down Conversion (DDC):
  •  96 dB dynamic range (16 bits).
  • Bandwidth configurable from 5 kHz to 500 kHz
  •  Automatic gain setting to achieve maximum dynamic range
• XML Remote Interface
• WINDOWS XP/2000/2003
• No interrupt is required.